Harbor Freight Paint Sprayer
Harbor Freight has a paint spray gun for any project and every budget. From auto shop paint guns from Spectrum and Black Widow, general paint sprayers from Avanti and Central Pneumatic, and high-quality airbrushes, we deliver performance and value.
1. Harbor Freight 4 oz. Adjustable Detail Spray Gun
This gun is so small it could probably slot into a woman’s purse. As that old saying goes, surprises are available in small packages. And this small applier could be a big surprise.
It gives a good finish, it blends well and there’s little overspray. Because it’s so small, it can get into many of these hard-to-reach places, just like the back of facia boards and therefore the underside of furniture.
The spray pattern is adjustable from the same old circular pattern to precipitation for more detailed work. The clean-up is often the worst part of the painting. But this applier comes with a brush and a wrench for maintenance.
The 4 oz metal cup can easily be removed and rinsed after use. If you’re struggling to get rid of the needle, you may be doing it wrong. This tiny gun is great for detail work and for enhancing jobs.
2. Harbor Freight 64 oz. Professional High Volume Low…
As much as you may love the mini applier above, I’m afraid you’ll be saddened by its big brother – this 64 oz. kit. This Harbor Freight paint sprayer kit includes a sprayer, a 64 oz. aluminum cup with a regulator and two 80. long hoses.
On the plus side, its cup is remote that the applier is less complicated to handle. You’ll carry the cup by its handle, or maybe hook it to your belt. This high volume, air mass (HVLP) applicator has been designed for automotive and industrial use and may be ideal for spraying primer.
It boasts a 75% transfer efficiency, so there is little overspray and minimal material wastage. I feel it might be great for spraying large areas like trucks, vans, and buses.
The biggest problem with the sprayer is that the gun itself tends to leak and things can get messy. In this case, Harbor Freight’s rigorous testing has allowed them to down. But they’re usually quite quick to correct problems, so I hope they observe this and modify this product. You’ll be able to find better pressure-pot spray guns here.
3. Harbor Freight Air Siphon Spray Gun Kit by USATNM
This is probably the foremost industrial of the applier kits tested for this Harbor freight paint sprayer review. Putting in place the atmospheric pressure and fluid flow on the pressure port may be complicated, but once you recognize what you’re doing, it’s a cinch.
A few models like this include a paint pressure tank and regulator within the kit. But this kit comes with just the gun and two 25ft hoses. made up of chrome steel and aluminum, the applier features conventional material transfer and a siphon-feed.
The two hoses, one rubber, and one PVC are often replaced individually, which could be a big plus. on behalf of me and my DIY jobs, this is often just an excessive amount of applicants. I’d leave it to the professionals.
4. Harbor Freight 2 Pc Professional Automotive HVLP Air…
This model is such an excellent deal. This kit comes with two spray guns: one a tiny low detail gun with a 4 oz. bottle, and a bigger gun with a 20 oz. bottle. The larger one comes with two nozzles and needles.
The kit also comes with an array of cleaning brushes and a wrench. All the goodies are available in a handy, hardy carry case. The limited gun is great for tiny detail work. One drawback on behalf of me is that the plastic gravity cup includes a plastic thread which will easily wear out if you’re not careful.
The cup for its bigger companion contains a metal thread, which can last longer. The guns, made of aluminum, feel sturdy and up to most jobs. I’ve seen it do a beautiful job on cars and DIY projects around the house.
Of course, I wouldn’t use it to paint my new Mercedes, but it might certainly do the task of sprucing up an old clunker.
5. Harbor Freight 32 oz. Heavy-Duty Multi-Purpose Air…
This no-nonsense paint applicator is right for automotive or industrial work. There’s nothing fancy about it, including the price. It’s a sturdy gun built for diligence. The stock has been ergonomically designed so it’s comfortable to use.
You won’t suffer from hand fatigue in the least. It features a 32 oz. aluminum dripless siphon cup and the applicator has an adjustable pattern.
Harbor Freight Electric Paint Sprayer – Hit or Miss in The Performance?
Unless you’re unaccustomed to the paint sprayer industry, you have got probably heard about Harbor Freight Electric Paint Sprayer. plenty of customer reviews are swirling around this big guy.
However, researching the pros and cons of Harbor Freight may take days. So just allow us to do the homework for you. during this one-stop review, we are visiting unveil all the basics of Harbor Freight paint sprayer, helping you to make your mind up whether or not you must finalize it as your buying decision.
Harbor Freight Electric Paint Sprayer Review
A Glimpse at Harbor Freight
Harbor Freight started as a family-owned business in 1977, providing a diversity of apparatus for household maintenance. Went over 40 years, the brand now offers wide-range equipment from hand tools and generators to air and power tools.
Its sub-brand – Krause & Becker is most known for painting kits, which include the electrical paint sprayer we’ll soon anesthetize the spotlight. Being on the marketplace for decades, Krause & Becker electric paint sprayer from Harbor Freight has gained the most popularity, and also the controversy about its quality has never ended. Let’s now dig in and explore the reality of this paint sprayer.
Key Product Specs
- Product Name: Krause & Becker Electric Paint Sprayer
- Material: Stainless steel frame
- Pressure Range: 1000 – 3000 PSI
- Engine: ⅝ hp
- Amperage: 7 amps
- Hose: 25 ft.
- Flow Rate: 18.6 GPH
- Fan Width: From 12 in. To 16 in.
- Power Cord Length: 1 ft. 8 in.
- Battery Required: No
- Weight and Dimensions: 19.20 lb. (Weight), 15-3/4 in. (Height), 12 in. (Length), 11-1/2 in. (Width)
Setup
This paint sprayer comes with an in-depth manual, so fitting won’t be a tricky task. Attaching the hose and applier is quick and straightforward. You won’t experience a steep learning curve in your first time coping with the package.
Krause & Becker electric paint sprayer is full of a simple twist knob pressure control. This functionality facilitates your steering when operating the paint sprayer. It also features a trigger lock to make sure the user’s safe when the applier isn’t in use.
Painting Performance
As compared to an atmospheric pressure sprayer, such an electrical one because the Krause & Becker could be a better idea for covering large surface areas. you’ll normally need quite 14 gallons of paint for a medium-size household project. this implies that airless sprayers will still be the king of professional quality painting jobs.
Krause & Becker does a good job of both priming and painting. It takes just some seconds to pressurize the applier and therefore the hose. you’ll need some first triggers to drop out of the air before painting the surface.
Material
With the chrome steel frame, the Krause & Becker electric applier from Harbor Freight will work with no idle issue for about two years. This frame also keeps the corrosion unfree, giving the machine longer and more power to tackle heavy-duty painting tasks.
The stainless-steel bucket is additionally ideal for preserving the finish quality. Besides the sturdiness, chrome steel material can save it slow and energy for the cleanup. There’ll still be some stubborn stains, but overall the looks remain at its clock time for quite a while.
Size And Weight
The Krause & Becker electric paint sprayer may be a lightweight alternative to professional contractors. It’s suitable for your DIY projects no matter the world you’ll be acting on.
The ergonomic handle on the paint sprayer is another feature making it compact and simple to hold around with. If you would like to maneuver from place to position and multitask between them, this sprayer is that the go-to choice. As being thin and everyone set able to work, it saves you ample effort while operating its machine.
Power
It can generate a maximum working pressure of 3000PSI, which is powerful enough to handle most interior and exterior projects. For light-duty projects, it is adjusted all the way down to 1000 PSI.
With a ⅝ hp motor and pressure control knob, Krause & Becker electric paint sprayer reduces overspray while still ensuring a regular finish. Most sprayers within the same category include a ½ hp motor, but the Krause & Becker truly takes an extra step. The sprayer also has an anti-rust motor; you ought to expect consistency in its performance.
Tip Sizes
The unit is flexible with an interchangeable nozzle; you’ll choose one that most closely fits your expectation in coverage, pattern, and flow. include the box; you’ll have a 517 tip; it thus can handle both latex and acrylic-based paints.
The tip is reversible for straightforward cleanup, therefore the clog-up issue rarely happens. And with the rust and wear-resistance properties, you won’t end up buying an aftermarket replacement tip anytime soon.
Cleanup
The suction hose and applicator will be cleaned up well with water or mineral spirits, counting on whether you utilize water-based or oil-based paint.
Cleanup work is additionally a breeze with this electric paint sprayer. But always remember to show it off and switch it to prime mode before cleaning.
If you would like to scrub it for long-term storage, there’s yet one more step to require. Simply disassemble the filter inside the gun and rinse it with water. After letting it dry, you’ll assemble the filter back to the applicator, then store the kit in your garage.
See Also: How to scrub and Lubricate the Krause and Becker Electric Paint Sprayer
Hose Connection
The suction and return tubes are in close coordination, accelerating the suction either from a paint bucket or the other paint container. The mounted filter inside the hose helps reduce the bubbles and contaminants. The applier will then kick off with pure paint fluid to make sure of an excellent coating.
The hose is 25 feet, and therefore the electric cord is 1 foot 8 inches long, supplying you with enough flexibility to travel back and forth when multitasking. Still, for entire household projects, moving the machine is unavoidable.
Price
Renting an electrical paint sprayer per week will certainly cost you quite a Krause & Becker. So if you’re visiting to use it daily, a Krause & Becker electric paint sprayer may be a worthy investment.
In the paint sprayer industry, Krause & Becker is rated as a reasonable brand. Consider all the salient features of this sprayer; it’s fair to mention Krause & Becker electric paint sprayer from Harbor Freight may be a real deal for anyone who is budget-conscious.
What do you have to Use This Painter For
Krause & Becker electric paint sprayer is cut out for all DIY projects that require a professional-grade paint finish. If you’re a fanatical home painter, this sprayer is for you. But if you’re an expert painter and painting is your job, Krause & Becker electric paint sprayer would be more suitable to be your affordable backup tool.
This sprayer works best for exterior projects with medium-large surface areas. you’ll be able to use it for decks, exterior walls, doors, etc., and obtain your job tired no time.
Pros and Cons
It’s impossible to search out an ideal paint tool with no downside. Understanding its disadvantages should be a more appropriate approach to taking the most effective use of the machine. So here are all the great and also the bad of Krause & Becker ⅝ hp paint sprayer.
Pros
Durable material – stainless-steel frame and wear-resistance properties
Trigger lock and straightforward twist knob control – Less overspray, more uniform finish
Powerful motor – Wide PSI range and robust engine
Compact design – a light-weight package that’s easy to maneuver around with
Affordability – Good price for good-value features
Cons
Noise – When it’s pressurized, the motor turns off and can return on after you use the applier again. The engine will then have a whirring sound for some seconds before it totally shuts down.
O rings – While doing post-job cleanup, the o rings get loose quite easily sometimes.
Are Electric Paint Sprayers Any Good?
A good value electric paint sprayer will do wonders for your painting jobs. There are many merits to the present tool, but let’s break it all the way down to the 2 most well-liked staples.
Precise and Even Coating
Whether it’s a touchup task for an uneven surface or a large-scale painting job, a top-quality electric paint sprayer can always apply a smooth and even coating. because the paint is atomized very finely by an electrical engine, the result’s far better than that from a roller, brush, or conventional sprayer.
Lower Cost, Higher Speed
An electric paint sprayer might not be cheap, but it surely saves you some money. By reducing the overspray and paint waste, also gives better paint control and efficiency. You won’t spend some extra budget on solvents for the prep work, which makes the electrical sprayer an economical paint applicator within the long term.
Spray Tips With Harbor Freight Electric Sprayer
It’s advisable to stay on a wet edge while painting with this electric paint sprayer. Otherwise, there’ll be lap marks becoming more and more apparent within the years to return.
There must be no bubble within the tube after you pull the sprayer gun’s trigger. countercheck the valve to form sure you’ve got it properly connected so that no air can get inside.
Beware of the tip size; it should be suitable with the paint viscosity and surface size. the larger the amount assigned to the tip size, the larger the nozzle is, and also the thicker the paint is often.
Always do some test sprays before actually applying paint on the surface. this can facilitate your get accustomed to the movement of the applier to make an excellent coating.
After your painting job or once you are taking a prospect, it’s important to lock the trigger to avoid paint waste, clog-up issues, and also for safety purposes.
It’s recommended to require an occasion from your painting work every half-hour. painting continuously for an extended time may be harmful to your eyes.
Harbor Freight Electric Paint Sprayer Troubleshooting
The pump cannot prime
Likely, your cleanup isn’t “clean” enough, and therefore the input valve is now clogged. Press the inlet release button, and check the inlet check ball again, and clean it up if in need.
Blobs and splatters
The consistent performance could also be the result of an obstructed trigger, clogged tip, or damaged filter. Disassemble them to test if they have cleaned.
Orange peels
If the surface is bumpy and has the orange-peel texture, it’s probably because the paint is simply too thick, the gun is simply too distant from the surface while operating, or the paint volume is inaccurate. Try adjusting the pressure control knob, holding the sprayer closer to the surface, or thinning the paint if necessary.
Uneven coating
If everything works fine, but the coating remains uneven, maybe it’s time to possess a fast check on your painting technique. Also, sometimes when the paint is just too thick or too thin, and also the tip size isn’t compatible, this issue may happen.
Contamination
There is also insufficient sanding, raised grain, or an excessive amount of dirt on the surface. ensure the surface is correctly sanded and thoroughly cleaned before applying paint.
Conclusion
This sprayer is one of the simplest heavy-duty paint applicators for DIY household projects. The all-inclusive package makes it able to run right out from the box. And it won’t leave you skinned by having to shop for any accessories. Overall, Harbor Freight Electric Paint Sprayer is that the tool to tackle any of your weekend projects.
Harbor Freight applier Range
Harbor Freight could be a good place to seek out a worth for money gun. they’re family-owned and run and that they are around for four decades, selling hard-working tools to hardworking people.
Their products are put through a rigorous series of tests that go far beyond the range of normal use. In short, the oldsters at Harbor Freight know heck plenty about tools. they need a good range, far beyond paint sprayers including saws, hand tools, and far more.
You can develop great deals from Harbor Freight because they buy directly from the identical factories that offer the costlier brands. They stock their own brand moreover as others but during this review, we’ll specialize in their range of spray guns.
Additionally, they sell directly on Amazon which makes it even easier to seek out a bargain. The Harbor paint sprayer range includes small spray guns well-suited to detail work. and so there are the heavy-duty spray guns for larger jobs that require something more robust.
KRAUSE & BECKER Airless Paint Sprayer Kit for $164.99
Buy the KRAUSE & BECKER Airless Paint Sprayer Kit (Item 60600) for $164.99 with coupon code 30323201, valid through June 30, 2020. See the coupon for details.
Compare our price of $164.99 to Graco at $299.00 (model number: 262800). Save $134 by shopping at Harbor Freight.
Get the power to tackle your biggest weekend projects with this airless paint sprayer. Decks, exterior walls, ceilings, doors, and frames – this paint sprayer does it all. Pumps straight from 1 or 5-gallon buckets for easier cleanup.
The KRAUSE & BECKER Airless Paint Sprayer Kit (Item 60600 / 62915 / 68001) has a 4.5-star rating on HarborFreight.com. Stretch your dollar further at Harbor Freight. Shop our Items Under $10
How does one Use A Harbor Freight HVLP Spray Gun?
DIY, Jobs, Machine ToolsTaggedAtomization, Easy Tips to Use a Harbor Freight HVLP applicator, Fan Control, Fluid Volume Controls, Harbor Freight HVLP applier, Paint Guns, Painters, Pressure, Spray Guns
The job of painting is commonly done by professionals and not otherwise. However, as someone inquisitive about painting, it’s better that you simply choose small projects to start with. this might be a perfect choice for you as things would be much easier to start with. it might be less painstaking and less troublesome at the identical time. If you decide to require up large projects the probability of you being lost is high. There are various sorts of paintings that you simply can prefer to select from.
Two of the foremost common categories that paintings fit into are spraying and employing a brush. Although the latter is taken into account old fashion and traditional it’s still in use by many of us. this is often because of its affordability likewise as a lower consumption rate of the paint used. However, people nowadays within the era choose spray guns over the normal methods.
To begin with, you ought to understand how these paint guns work. Only upon understanding these basics you’d be ready to do an honest job at painting anything. So, a basic understanding is what we see below that’s required for starters. Once you understand the fundamentals it’d be easier to maneuver to the following level in a better manner. If you are doing not understand the fundamentals then the probability of being an honest painter is incredibly low.
This applies to those who take up painting as a hobby and do small painting projects reception. Professional painters barely use Harbor Freight HVLP spray guns as they take up more of their time than other options. Having said that novice users would be best suited to use these as they’re user-friendly. we glance at the steps that may facilitate your work with this spray gun with relative ease.
Adjusting Pressure
One of the first things that you simply must begin with is adjusting pressure. make sure that the opening of the compressor regulator gives ample pressure to the gun. Setting the pressure to the desired level and have the trigger pulled. The valve at the underside of the handle must be closed with the trigger still pulled. Then you’d open it up to the purpose where the quantity of the air remains identical. The volume of the air is found out just by being attentive to it and knowing how loud or noiseless it’s.
Adjusting The Fan
At the rear of the gun, you’d see the fluid volume controls. you’d need to open it to 2 – 3 counts for beginners. you should select to possess the fan control down. If you are doing you’d have a small circle once you spray. Have a test surface able to test this part of the equipment. Keep the gun between 6 and eight inches far away from the surface and pull the trigger. you’d just turn the fan control while doing this until you’re ready to obtain the correct shape in terms of diameter.
Fluid Control
Adjusting the fluid volume at the rear of the gun is that the next step although it should be done while the trigger continues to be on. It should be kept at a volume where you are doing not cause runs after you sweep left to right or in up and down motions. Read the manual carefully on the way to begin in terms of the motion. they might best advise you to settle on the left to right motions than otherwise.
Setting Up The applicator
This is relatively a technical aspect of fitting the harbor freight HVLP applier. By reading the manual carefully you’d be able to determine which pressure is enough for painting. Most high-end guns have manuals explaining what quantity pressure is required. In this manner you’ll adjust per the paint used and also the surface it’s used on.
Painting
This is all buying the last part where you start to color and make minor last-minute adjustments. This totally depends on the surface that you just are painting. You should have a look at how the paint comes out of the nozzle and spreads on the surface. By viewing this you’d get to search out out if it requires more adjustment or not.
In case you’re looking to spray on smaller areas you may want to show the fan down. this might make sure that the gun itself sprays on a smaller area. To be able to avoid runs you would possibly even have to show the amount on the applicator clockwise. this might make sure that you’re decreasing the quantity of paint that’s sprayed.
Adequate Pressure
To be able to get appropriate atomization you’d need to use high so that the quantity is often turned up. The more pressure that you just produce the lesser runs because of better atomization. this is often one amongst the foremost critical aspect that you simply would need to examine once you are using expensive paints. you’d not want to waste your money with the paint being wasted. you’d have little to no peel and runs when the pressure is at its optimal levels.
Conclusion
Although there could be slight changes within the way things operate physically these are the fundamentals that you just must know. If you’re able to keep these items in mind while operating a twig gun there are minimal chances of you going wrong. one in every of the first advice that you just would get from experts is to do it on a trial basis. this will be done on useless equipment to determine how good you’re a painting.
Once you’re clear with all the nuances of using the harbor freight HVLP applier you’ll advance to painting projects. Always remember that the pressure that you simply use can vary counting on the paint that you simply use. Also, you’d not need such a lot of pressure while employing a primer. If you’re ready to operate your harbor freight HVLP applier with these instructions you’re sure to get good results.
FAQs
What is the black cup that comes with the package of Krause & Becker Electric Paint Sprayer?
It is wont to measure how briskly your paint can pour through it, so you’ll be able to decide if the paint’s viscosity needs any thinning.
Should I exploit the 5-gallon or 1-gallon paint bucket?
Krause & Becker Electric Paint Sprayer from Harbor Freight can work well on either of the volumes.
Can I attach a 50-feet hose to the present paint sprayer?
Yes, you can. The hose on this paint sprayer is often easily attached and detached.
Can this sprayer be used for outdoor wooden fences?
Yes, it can. But remember to regulate the pressure control knob to avoid overspray.
Can this sprayer be plugged to 220V?
No, it works with 120V only.